# How to integrate Fluxguard MCP with Atomic Agent

```json
{
  "title": "How to integrate Fluxguard MCP with Atomic Agent",
  "toolkit": "Fluxguard",
  "toolkit_slug": "fluxguard",
  "framework": "Atomic Agent",
  "framework_slug": "atomic-agent",
  "url": "https://composio.dev/toolkits/fluxguard/framework/atomic-agent",
  "markdown_url": "https://composio.dev/toolkits/fluxguard/framework/atomic-agent.md",
  "updated_at": "2026-08-11T13:09:45.152Z"
}
```

## Introduction

Atomic Agent is an open-source AI agent that runs on your machine and supports local models through llama.cpp. Connect it to 1,500+ apps through Composio, including Fluxguard.
This guide uses Atomic Agent's built-in Composio integration. You need Atomic Agent v0.5.6 or later, your own Composio API key, and a Fluxguard account. See the [Atomic Agent documentation](https://atomicagent.io/docs/?cta_placement=atomic-agent-docs) for installation instructions.

## Also integrate Fluxguard with

- [OpenAI Agents SDK](https://composio.dev/toolkits/fluxguard/framework/open-ai-agents-sdk)
- [Claude Agent SDK](https://composio.dev/toolkits/fluxguard/framework/claude-agents-sdk)
- [Claude Code](https://composio.dev/toolkits/fluxguard/framework/claude-code)
- [Claude Cowork](https://composio.dev/toolkits/fluxguard/framework/claude-cowork)
- [Codex](https://composio.dev/toolkits/fluxguard/framework/codex)
- [OpenClaw](https://composio.dev/toolkits/fluxguard/framework/openclaw)
- [Hermes](https://composio.dev/toolkits/fluxguard/framework/hermes-agent)
- [Google ADK](https://composio.dev/toolkits/fluxguard/framework/google-adk)
- [LangChain](https://composio.dev/toolkits/fluxguard/framework/langchain)
- [Vercel AI SDK](https://composio.dev/toolkits/fluxguard/framework/ai-sdk)
- [Mastra AI](https://composio.dev/toolkits/fluxguard/framework/mastra-ai)
- [LlamaIndex](https://composio.dev/toolkits/fluxguard/framework/llama-index)
- [CrewAI](https://composio.dev/toolkits/fluxguard/framework/crew-ai)
- [Pydantic AI](https://composio.dev/toolkits/fluxguard/framework/pydantic-ai)
- [AutoGen](https://composio.dev/toolkits/fluxguard/framework/autogen)

## TL;DR

### How Atomic Agent connects to Fluxguard
Atomic Agent connects to Composio's Tool Router over Streamable HTTP MCP. It discovers the tools needed for your request, and Composio handles account authentication.
Execution and account-connection tools follow Atomic Agent's configured approval policy. Review any approval prompt before allowing an action on your connected account.

## Connect Fluxguard to Atomic Agent

### Connect Fluxguard to Atomic Agent
- Sign up or sign in to the [Composio dashboard](https://dashboard.composio.dev/?cta_placement=atomic-agent-api-key). Copy your API key.
- In Atomic Agent, open the Integrations tab and select Composio. Select API key, press e, paste the key, and press Enter. The tools become available immediately, without a restart.
- Ask Atomic Agent to do something in Fluxguard. It searches Composio for the right tool.
- On first use, open the sign-in link returned in the chat. Connect your Fluxguard account, then return to Atomic Agent to continue.
### Headless setup
Add the following line to ~/.atomic-agent/.env, replacing YOUR_COMPOSIO_API_KEY with your key. Start Atomic Agent after saving the file.

```bash
COMPOSIO_API_KEY=YOUR_COMPOSIO_API_KEY
```

## What is the Fluxguard MCP server, and what's possible with it?

The Fluxguard MCP server is an implementation of the Model Context Protocol that connects your AI agent and assistants like Claude, Cursor, etc directly to your Fluxguard account. It provides structured and secure access to your website monitoring and alerting data, so your agent can perform actions like adding new monitored pages, categorizing sites, retrieving alerts, acknowledging changes, and managing webhooks on your behalf.
- Automated website monitoring setup: Direct your agent to add new web pages or entire sites for continuous change detection and tracking with just a quick prompt.
- Alert retrieval and analysis: Have your agent fetch detailed information about recent alerts, surfacing critical changes on any monitored page instantly.
- Intelligent alert acknowledgment: Let your agent acknowledge and mark alerts as reviewed, helping your team stay organized and responsive.
- Site and category management: Organize your monitored properties by creating, updating, or deleting site categories to keep your web asset monitoring streamlined.
- Webhook automation: Set up or remove webhooks to automate notifications, ensuring you never miss an important website change event.

## Supported Tools

| Tool slug | Name | Description |
|---|---|---|
| `FLUXGUARD_ADD_PAGE` | Add FluxGuard Page | Tool to add a new page for monitoring in FluxGuard. This action can: 1. Create a new site with a page (when siteId/sessionId are not provided) 2. Add a page to an existing site (when siteId/sessionId are provided) When creating a new site, you can optionally assign it to categories and provide a nickname. Use this when you need to start monitoring a URL for changes. |
| `FLUXGUARD_CREATE_SITE_CATEGORY` | Create FluxGuard Site Category | Creates a new site category in FluxGuard for organizing monitored websites. Site categories help you group and manage your monitored sites logically (e.g., by environment like 'Production' or 'Staging', by purpose like 'Marketing' or 'E-commerce', or by client/team). Use this action to create categories before adding sites, making it easier to filter and organize your monitoring dashboard. The returned category ID can be used when adding sites to assign them to this category. |
| `FLUXGUARD_CREATE_WEBHOOK` | Create Webhook | Creates a webhook endpoint registration in FluxGuard to receive real-time notifications when changes are detected on monitored pages. When changes occur, FluxGuard will POST JSON data to your specified URL containing change details, diff information, and file references. Use this when you need to integrate FluxGuard change detection into your own systems, automation workflows, or alerting infrastructure. Note: Only one webhook can be active per account. Creating a new webhook will replace any existing webhook configuration. |
| `FLUXGUARD_DELETE_PAGE` | Delete Fluxguard Page | Permanently deletes a monitored page from FluxGuard along with all its captured snapshots and version history. This is a destructive operation that cannot be undone. Use this when you need to remove a page that is no longer needed for monitoring. The operation is idempotent - deleting an already-deleted page will succeed without error. To obtain the required IDs (site_id, session_id, page_id), first use FLUXGUARD_ADD_PAGE to create a page or FLUXGUARD_GET_SITES to list existing sites and their pages. |
| `FLUXGUARD_DELETE_SITE` | Delete Fluxguard Site | Permanently deletes a monitored site and all associated data including sessions, pages, and captured versions. This operation is idempotent - deleting a non-existent site returns success. Use when you need to remove a site from FluxGuard monitoring. |
| `FLUXGUARD_DELETE_WEBHOOK` | Delete Webhook | Permanently removes a webhook from your FluxGuard account by its ID. After deletion, the webhook will no longer receive notifications about monitored page changes. This operation is idempotent - deleting a non-existent webhook will succeed without error. Use this tool when you need to remove a webhook configuration that is no longer needed. |
| `FLUXGUARD_GET_ALL_CATEGORIES` | Get All FluxGuard Categories | Retrieves all categories defined in your FluxGuard account. Use this tool when you need to: - List all available categories for organizing sites or pages - Get category IDs for use in other operations - Check what categories exist before creating new ones This is a read-only operation that returns both site and page categories. No parameters are required - simply call this action to get all categories. |
| `FLUXGUARD_GET_PAGE_DATA` | Get FluxGuard Page Data | Tool to retrieve comprehensive data for a monitored page in FluxGuard. This action fetches detailed information about a specific page including its URL, monitoring status, capture history, and metadata. Use this when you need to verify a page exists, check its monitoring status, or retrieve page configuration details. The page must be identified by its site_id, session_id, and page_id, which are typically obtained from FLUXGUARD_ADD_PAGE when creating a page or from FLUXGUARD_GET_SITES when listing existing sites and their pages. |
| `FLUXGUARD_GET_SAMPLE_WEBHOOK` | Get Sample Webhook Payload | Tool to retrieve a sample webhook payload. Use when you need to inspect the structure of webhook notifications. |
| `FLUXGUARD_GET_USER` | Get Current FluxGuard Account | Retrieves the authenticated FluxGuard account's information as a user profile. Returns details about the current organization's account including ID, status, creation date, and last update timestamp. This provides account information in a user-friendly format for the authenticated API key's organization. |
| `FLUXGUARD_GET_WEBHOOKS` | Get FluxGuard Webhooks | Retrieves all configured webhooks for the FluxGuard account. Use this action to list all webhook endpoints that are configured to receive FluxGuard change notifications. Each webhook includes its URL, secret for signature verification, API version, and associated site categories. No parameters required - returns all webhooks for the authenticated account. |
| `FLUXGUARD_INITIATE_CRAWL` | Initiate FluxGuard Crawl | Tool to initiate a crawl for a session identified by siteId and sessionId. Use when you need to start monitoring a site for changes after adding pages with FLUXGUARD_ADD_PAGE. |
| `FLUXGUARD_WEBHOOK_NOTIFICATION` | Fluxguard Webhook Notification | Simulate Fluxguard webhook notification by sending change detection data to your webhook endpoint. Use this tool to test your webhook receiver implementation by sending it a properly formatted Fluxguard webhook payload with optional HMAC signature authentication. This helps verify your endpoint can receive and process Fluxguard change notifications correctly. Note: This does NOT retrieve data from Fluxguard or trigger actual monitoring - it only sends test notifications to your webhook URL. |

## Supported Triggers

None listed.

## Troubleshooting

### Why is my API key rejected?

Copy the key directly from the Composio dashboard. Atomic Agent requires ASCII characters because it sends the key in an HTTP header. Remove any extra characters introduced when copying.

### Why are Composio tools unavailable after saving a key?

Check that you use Atomic Agent v0.5.6 or later and that Composio is enabled in your configuration. A "composio": { "enabled": false } setting disables the integration while keeping the saved key on disk.

### Does Composio have a free plan?

The Hobby plan includes 100,000 tool calls per month. Composio-managed OAuth apps have a lower included allowance. See [Composio pricing](/pricing) for the current limits that apply to your connection.

## Complete Code

None listed.

## Conclusion

### Use Fluxguard from Atomic Agent
With your account connected, ask Atomic Agent to work with Fluxguard in natural language. You can connect more apps through the same Composio integration as you need them.
Visit the [Atomic Agent website](https://atomicagent.io/?cta_placement=atomic-agent-site) or inspect the [Atomic Agent source code](https://github.com/AtomicBot-ai/atomic-agent?cta_placement=atomic-agent-repo).

## How to build Fluxguard MCP Agent with another framework

- [OpenAI Agents SDK](https://composio.dev/toolkits/fluxguard/framework/open-ai-agents-sdk)
- [Claude Agent SDK](https://composio.dev/toolkits/fluxguard/framework/claude-agents-sdk)
- [Claude Code](https://composio.dev/toolkits/fluxguard/framework/claude-code)
- [Claude Cowork](https://composio.dev/toolkits/fluxguard/framework/claude-cowork)
- [Codex](https://composio.dev/toolkits/fluxguard/framework/codex)
- [OpenClaw](https://composio.dev/toolkits/fluxguard/framework/openclaw)
- [Hermes](https://composio.dev/toolkits/fluxguard/framework/hermes-agent)
- [Google ADK](https://composio.dev/toolkits/fluxguard/framework/google-adk)
- [LangChain](https://composio.dev/toolkits/fluxguard/framework/langchain)
- [Vercel AI SDK](https://composio.dev/toolkits/fluxguard/framework/ai-sdk)
- [Mastra AI](https://composio.dev/toolkits/fluxguard/framework/mastra-ai)
- [LlamaIndex](https://composio.dev/toolkits/fluxguard/framework/llama-index)
- [CrewAI](https://composio.dev/toolkits/fluxguard/framework/crew-ai)
- [Pydantic AI](https://composio.dev/toolkits/fluxguard/framework/pydantic-ai)
- [AutoGen](https://composio.dev/toolkits/fluxguard/framework/autogen)

## Related Toolkits

- [Excel](https://composio.dev/toolkits/excel) - Microsoft Excel is a robust spreadsheet application for organizing, analyzing, and visualizing data. It's the go-to tool for calculations, reporting, and flexible data management.
- [21risk](https://composio.dev/toolkits/_21risk) - 21RISK is a web app built for easy checklist, audit, and compliance management. It streamlines risk processes so teams can focus on what matters.
- [Abstract](https://composio.dev/toolkits/abstract) - Abstract provides a suite of APIs for automating data validation and enrichment tasks. It helps developers streamline workflows and ensure data quality with minimal effort.
- [AccuWeather](https://composio.dev/toolkits/accu_weather) - AccuWeather is a global weather service providing current conditions, forecasts, MinuteCast precipitation, alerts, and lightning data. Use it for fast, localized forecasts and real-time weather alerts.
- [Adafruit IO](https://composio.dev/toolkits/adafruit_io) - Adafruit IO is Adafruit's cloud platform for connected device and IoT project data. It helps you store, visualize, and act on sensor feeds without running your own backend.
- [Addressfinder](https://composio.dev/toolkits/addressfinder) - Addressfinder is a data quality platform for verifying addresses, emails, and phone numbers. It helps you ensure accurate customer and contact data every time.
- [Agentql](https://composio.dev/toolkits/agentql) - Agentql is a toolkit that connects AI agents to the web using a specialized query language. It enables structured web interaction and data extraction for smarter automations.
- [Agenty](https://composio.dev/toolkits/agenty) - Agenty is a web scraping and automation platform for extracting data and automating browser tasks—no coding needed. It streamlines data collection, monitoring, and repetitive online actions.
- [Ambee](https://composio.dev/toolkits/ambee) - Ambee is an environmental data platform providing real-time, hyperlocal APIs for air quality, weather, and pollen. Get precise environmental insights to power smarter decisions in your apps and workflows.
- [Ambient weather](https://composio.dev/toolkits/ambient_weather) - Ambient Weather is a platform for personal weather stations with a robust API for accessing local, real-time, and historical weather data. Get detailed environmental insights directly from your own sensors for smarter apps and automations.
- [Anonyflow](https://composio.dev/toolkits/anonyflow) - Anonyflow is a service for encryption-based data anonymization and secure data sharing. It helps organizations meet GDPR, CCPA, and HIPAA data privacy compliance requirements.
- [ApexVerify](https://composio.dev/toolkits/apexverify) - ApexVerify is a contact-data validation service for emails and phone numbers. Use it to normalize, verify, and clean leads before they enter your systems.
- [Api ninjas](https://composio.dev/toolkits/api_ninjas) - Api ninjas offers 120+ public APIs spanning categories like weather, finance, sports, and more. Developers use it to supercharge apps with real-time data and actionable endpoints.
- [Api sports](https://composio.dev/toolkits/api_sports) - Api sports is a comprehensive sports data platform covering 2,000+ competitions with live scores and 15+ years of stats. Instantly access up-to-date sports information for analysis, apps, or chatbots.
- [Apify](https://composio.dev/toolkits/apify) - Apify is a cloud platform for building, deploying, and managing web scraping and automation tools called Actors. It lets you automate data extraction and workflow tasks at scale—no infrastructure headaches.
- [Autom](https://composio.dev/toolkits/autom) - Autom is a lightning-fast search engine results data platform for Google, Bing, and Brave. Developers use it to access fresh, low-latency SERP data on demand.
- [Beach Day API](https://composio.dev/toolkits/beach_day_api) - Beach Day API is a beach intelligence service for search, conditions, scores, rules, amenities, tides, and country coverage. Use it to power trip planning, surf reports, safety checks, and location-aware beach discovery.
- [Beaconchain](https://composio.dev/toolkits/beaconchain) - Beaconchain is a real-time analytics platform for Ethereum 2.0's Beacon Chain. It provides detailed insights into validators, blocks, and overall network performance.
- [Big data cloud](https://composio.dev/toolkits/big_data_cloud) - BigDataCloud provides APIs for geolocation, reverse geocoding, and address validation. Instantly access reliable location intelligence to enhance your applications and workflows.
- [Bigpicture io](https://composio.dev/toolkits/bigpicture_io) - BigPicture.io offers APIs for accessing detailed company and profile data. Instantly enrich your applications with up-to-date insights on 20M+ businesses.

## Frequently Asked Questions

### What are the differences in Tool Router MCP and Fluxguard MCP?

With a standalone Fluxguard MCP server, the agents and LLMs can only access a fixed set of Fluxguard tools tied to that server. However, with the Composio Tool Router, agents can dynamically load tools from Fluxguard and many other apps based on the task at hand, all through a single MCP endpoint.

### Can I use Tool Router MCP with Atomic Agent?

Yes, you can. Atomic Agent fully supports MCP integration. You get structured tool calling, message history handling, and model orchestration while Tool Router takes care of discovering and serving the right Fluxguard tools.

### Can I manage the permissions and scopes for Fluxguard while using Tool Router?

Yes, absolutely. You can configure which Fluxguard scopes and actions are allowed when connecting your account to Composio. You can also bring your own OAuth credentials or API configuration so you keep full control over what the agent can do.

### How safe is my data with Composio Tool Router?

All sensitive data such as tokens, keys, and configuration is fully encrypted at rest and in transit. Composio is SOC 2 Type 2 compliant and follows strict security practices so your Fluxguard data and credentials are handled as safely as possible.

---
[See all toolkits](https://composio.dev/toolkits) · [Composio docs](https://docs.composio.dev/llms.txt)